Pages

Monday, November 30, 2009

Using the HygieniKit

Your collection kit comes preassembled in Purely Yours product packaging. If you purchased the product with the black tote bag or backpack, simply screw collection bottles onto the breast flanges

Clean collection kit parts (except tubing, white cap and white pump connector) Once all parts are clean and dry, assemble the collection kit as follows:

  1. Place diaphragm into piston chamber and snap white cap onto piston chamber.
    Gently secure white valve into lower portion of breast flange. NOTE: Use caution when handling and cleaning the small white valve (see cleaning instructions).
  2. Screw collection bottle onto breast flange.
  3. Insert white pump connector, at end of tubing, into tubing adapter input on the pump. Hold the collection kit to your breast(s) so that the nipple is aligned to extend straight toward the nipple tunnel of the breast flange.
  4. Make sure the breast completely fills the breast flange so that a vacuum is formed and no air escapes. The collection kit and nipple tunnel must tild slightly downward to allow milk to flow naturally toward the bottle.

To dual pump, you may use both hands to hold the collection kit against each breast. Alternatively, you may use one hand to hold one breast flange against the breast and the forearm to hold the other breast flange against the other breast.


To Single Pump:Remove one tube and close the white pump connector

To Dual Pump:Both tubes should be attached to the white pump connector.

No comments:

Post a Comment