Cleaning Instructions
Unless otherwise instructed by your healthcare provider, follow these sanitizing and cleaning instructions
SanitizationPrior to using the kit for the first time, boil all parts of the collection kit for 20 minutes - except for the tubing, white cap and white pump connector. Remove all parts from water immediately after boiling. Completely air dry before assembly and next use.
Do not wash the tubing, white cap and white pump connector.
CleaningSet aside the tubing, white cap and white pump connector. These items do not need to be washed or sanitized because the silicone diaphragm prevents them from coming into contact with the breast milk.
The breast flange and bottles may be cleaned in the upper compartment of your dishwasher or hand washed with dish soap in hot water. For best results, Ameda recommends using a baby bottle brush to clean the bottle and a baby nipple brush to clean the insides of the breast shield. DO NOT use solvents or abrasives. Rinse with hot, clean water. All other parts of the collection kit should be hand washed to prevent loss and extend their usefulness.
Remove the white valves, breast flanges, silicone diaphragms, breast shields and collection bottles for cleaning after each use of the pump. The silicone diaphragms and white valves should be hand washed to prevent loss and extend usefulness. It is important to properly reassemble these parts for the collection kit to operate as designed with the Purely Yours or any other Ameda electric breast pump.
Completely air dry cleaned parts on a clean towel or drying rack. If they will not be used for several hours, cover them with a clean towel.
NOTE: Use caution when cleaning the small white valve. It is critical for proper suction. Do not use excessive force and do not clean with a baby bottle brush or a nipple brush. Gently wash by hand in hot soapy water and rinse under hot running water.
Unless otherwise instructed by your healthcare provider, follow these sanitizing and cleaning instructions
SanitizationPrior to using the kit for the first time, boil all parts of the collection kit for 20 minutes - except for the tubing, white cap and white pump connector. Remove all parts from water immediately after boiling. Completely air dry before assembly and next use.
Do not wash the tubing, white cap and white pump connector.
CleaningSet aside the tubing, white cap and white pump connector. These items do not need to be washed or sanitized because the silicone diaphragm prevents them from coming into contact with the breast milk.
The breast flange and bottles may be cleaned in the upper compartment of your dishwasher or hand washed with dish soap in hot water. For best results, Ameda recommends using a baby bottle brush to clean the bottle and a baby nipple brush to clean the insides of the breast shield. DO NOT use solvents or abrasives. Rinse with hot, clean water. All other parts of the collection kit should be hand washed to prevent loss and extend their usefulness.
Remove the white valves, breast flanges, silicone diaphragms, breast shields and collection bottles for cleaning after each use of the pump. The silicone diaphragms and white valves should be hand washed to prevent loss and extend usefulness. It is important to properly reassemble these parts for the collection kit to operate as designed with the Purely Yours or any other Ameda electric breast pump.
Completely air dry cleaned parts on a clean towel or drying rack. If they will not be used for several hours, cover them with a clean towel.
NOTE: Use caution when cleaning the small white valve. It is critical for proper suction. Do not use excessive force and do not clean with a baby bottle brush or a nipple brush. Gently wash by hand in hot soapy water and rinse under hot running water.
No comments:
Post a Comment